Quick Reference Guide to Logic Gates — Symbols, Truth Tables & Basics

Looking for a super simple way to understand Logic Gates?
You're in the right place!


We've created a one-page PDF that covers the symbols, truth tables, and basic working of the most essential logic gates — including AND, OR, NOT, NAND, NOR, XOR, and XNOR!

  • Easy-to-read diagrams
  • Clear truth tables
  • Perfect for students, hobbyists, and electronics enthusiasts

Whether you're prepping for exams, building circuits, or just refreshing your basics, this quick guide is your go-to cheat sheet.⚡

Download your Quick Logic Gates Reference PDF below and start mastering digital electronics today!
👇

Hobitronics Quick Guide to Logic Gates.pdf

Comments

Post a Comment

Popular posts from this blog

Why Does My Old Phone Charge Slowly But Heat Up More?

Image
The Truth About Aging Batteries Welcome back to Hobitronics — where we decode the daily mysteries inside your gadgets. Today we’re getting into something everyone with a 3-year-old smartphone has asked themselves: "Why is my phone charging so slow? And why does it feel like it’s cooking itself while doing it?" You’re not imagining it. Aging phones really do charge slower and heat up more — and the reason lies deep inside the battery chemistry , internal resistance , and the invisible wear and tear of thousands of charging cycles. 1. Your Battery Ages — Even If It Looks Fine Smartphones use Li-ion or Li-Po batteries . These are fantastic when new, but over time: Electrochemical reactions degrade the anode/cathode SEI (Solid Electrolyte Interface) layer thickens Lithium plating reduces active ions Capacity drops with every charge-discharge cycle This degradation results in something very important: higher internal resistance . 2. Internal Resistance: Th...
Read more

Pulse Code Modulation (PCM): The Digital Backbone of Modern Communication

Image
Introduction: Why PCM Matters In the era of smartphones, digital streaming, and cloud-based communication, it's easy to forget that all digital information starts out analog. Whether it’s your voice, your favorite song, or a movie’s soundtrack, sound begins as a continuously varying signal. But to store, transmit, or process it digitally, we need to convert it into a digital form—and that's where Pulse Code Modulation (PCM) comes in. PCM is the foundation of digital audio , and it plays a crucial role in telecommunications, media storage, and even space communication. Let’s dive deep into how it works, why it’s important, and where it’s used. What is PCM? Pulse Code Modulation (PCM) is a method used to digitally represent analog signals. It involves sampling , quantizing , and encoding an analog input into a binary form suitable for transmission or storage. Think of PCM as translating a wave of sound into a digital language that machines can understand. The Three Core P...
Read more

Why Do Phone Chargers Get Hot While Charging?

Image
Welcome back to Hobitronics — where we decode the daily mysteries inside your gadgets. Today we’re talking about something everyone has noticed at some point: Why does your phone charger heat up when you're using it? — and why do the cheap ones feel like they might just melt? That warmth isn’t just you imagining things. It’s real, and it’s telling you something about what’s happening inside the plastic shell of that adapter. Especially with budget chargers, the heat is more than a minor annoyance — it’s a sign of energy loss , sloppy design , and sometimes, real danger. 1. What's Actually Inside a Charger? Your phone charger might look like a simple plug, but it’s actually a clever little Switch Mode Power Supply (SMPS) . It takes the high-voltage AC from your wall and transforms it into a low-voltage, phone-friendly DC output. Here’s the quick path: 230V AC in → DC conversion → stepped-down voltage → regulated output Key parts of a charger includes: Bridge Rect...
Read more

Controlling RGB LEDs with PWM Using Arduino

Image
P ulse Width Modulation (PWM) is not just a feature of microcontrollers — it’s a foundational technique in electronics. From dimming LEDs to simulating analog voltage levels, PWM is used in display systems , communication protocols , and motor drivers.  In this article, we’ll explore how PWM works technically and apply it to a fun and colorful project: controlling an RGB LED using an Arduino . Whether you’re an engineering student or a DIY hobbyist, this simple RGB LED demo will give you a hands-on feel for what PWM really means — both in concept and application. What is a Common Cathode RGB LED? An RGB LED combines three LEDs — Red, Green, and Blue — into a single package. In a common cathode RGB LED , all three internal LEDs share one ground (GND) pin. The remaining three pins individually control the red, green, and blue segments. By varying the amount of current (or rather, the voltage drop) across each color pin, you can create a wide spectrum of colors through additive...
Read more

ASK, FSK & PSK Explained

Image
In the world of modern communication—whether you're streaming videos, using Wi-Fi, or sending data over Bluetooth— digital modulation plays a critical role. It's the art of taking your binary data (0s and 1s) and efficiently converting it into analog waveforms so it can travel across airwaves or wires. Among the various digital modulation techniques, ASK (Amplitude Shift Keying), FSK (Frequency Shift Keying), and PSK (Phase Shift Keying) form the foundational trio. Understanding these will unlock your grasp of how digital signals are transmitted reliably and efficiently. Let’s explore each of these in detail: 🔷 1. Amplitude Shift Keying (ASK) ➤ What is ASK? Amplitude Shift Keying works by varying the amplitude of a carrier wave to represent binary data. Bit 1 is transmitted using a carrier wave of fixed amplitude. Bit 0 is transmitted by turning the carrier OFF (zero amplitude) or using a smaller amplitude. This is often called On-Off Keying (OOK) . ➤ Wavef...
Read more

Terahertz (THz) Communication: The Future of 6G Explained

Image
Discover how Terahertz (THz) waves could enable 6G with ultra-high speeds, low latency , and immersive tech like AR/VR , holograms , and smart automation .  As we step into an era dominated by hyperconnectivity , real-time virtual experiences , and intelligent automation , our current wireless communication technologies are quickly approaching their physical limits. This is where Terahertz (THz) communication steps in — not just as an upgrade, but as a revolution in the making. In this blog, let’s explore how THz waves could power 6G and reshape the future of wireless communication . ⚡ What Is Terahertz Communication in 6G? Terahertz (THz) refers to the frequency range between 0.1 THz and 10 THz , which lies between the microwave and infrared spectrum. Traditionally known as the “THz gap” , this range remained underutilized due to technological barriers in generating and detecting such high frequencies. However, with breakthroughs in semiconductor devices , nanotechnolog...
Read more

Why Does Tea Taste Weird on an Induction Stove?

Image
Science Behind the Taste Change Welcome to the Hobitronics blog — a space where everyday curiosities about electronics and appliances get the deep respect they deserve. You're not just asking "Why does tea taste off when I use an induction stove?" You're asking one of the most nuanced, beautifully human questions: "What really happens under the hood of our everyday devices?" And that is exactly what Hobitronics is here for — to make the complex beautiful, relatable, and fun. This is part of our series where we decode the science of consumer electronics that people use every day but rarely understand. So let’s talk about tea☕. Me? Personally? My day doesn't start without a hot cup of tea. No offense to the coffee gang, but my favorite will always be the simple, soul-healing cup of tea. But if you’ve ever made tea on an induction stove ... you might’ve noticed something strange: It overboils too quickly The tea turns slightly bitter The milk...
Read more

How MOSFETs Work with Arduino: PWM Control, Applications, and Pro Tips

Image
If PWM is the brain signal, the MOSFET is the muscle that makes it move. From your Arduino's motor shield to your laptop charger and even your electric vehicle's inverter — MOSFETs silently power modern electronics with unmatched speed and precision. In this blog, we’ll break down how MOSFETs work, where they’re used, and how they bring digital control to life — especially when combined with PWM. In this blog, we’ll break down: What a MOSFET is How it works with PWM Real-world uses (motors, LEDs, inverters, etc.) Pro design tips for safe and effective usage 1. What is a MOSFET? MOSFET stands for Metal-Oxide-Semiconductor Field-Effect Transistor .   It’s a type of transistor widely used for switching and amplification , especially in high-speed, high-efficiency applications . Key Roles: Acts like a gate-controlled switch — voltage on the Gate decides whether current flows. Used to control large loads using small digital signals (e.g., from microcontr...
Read more